Principal Investigator

1.      The Role of PMMA Bone Cement Within Osteoporotic Bone- Thermal Injury, Permeability and Mechanical Properties

        (NSC 101-2221-E-182 -010, 2012.8.1 to 2013.7.31)

2.     Improvement of the Accuracy and Reliability for Implantation of Femoral Component in Hip Resurfacing Using Three-Dimensional Reconstruction and Reverse Engineering (2011.12.1 to 2013.11.30)

3.      Bbiomechanical Study for Treatment of Unstable Trochanteric Fractures with Osteoporotic Bone-Comparison between a PMMA Cemented DHS and an Intramedullary Device (NSC 100-2221-E-182 -023, 2011.8.1 to 2012.7.31)

4.      The Development of A Newly Designed Expandable Cage for Spinal Fusion Surgery (NSC 100-2622-E-182 -002 -CC3, 2011.6.1 to 2012.5.31)

5.      The Effects of Femoral Component Malalignment and Femoral Head Necrosis on the Biomechanical Performance of the Proximal Femur in Resurfacing Hip Arthroplasty  (NSC98-2221-E-182-009-MY2,  2009.8.1 to 2011.7.31)  

6.      The role of femoral head necrosis on hip resurfacing arthroplasty- thermal damage potential, component stability and stress distribution

         (NSC 97-2221-E-182 -001, 2008.8.1 to 2009.7.31) 

7.      Evaluation of Mechanical Performance of Dynamic Stabilization Device for Spinal Non-Fusion Surgery

         (ITRI Project, GERPD ,2008.3.1 to 2008.12.15)      

8.      Development of A Newly Designed Intervertebral Fusion Device

         (SCRPD, 2007.5.1 to 2008.10.31) 

9.      The Biomechanical Study of A Modified Periacetabular Osteotomy (2)

         (NSC95-2221-E-182-079-MY2, 2007.8.1 to 2008.7.31)       

10.    Development of A Newly Designed Fixation Screw with Full-Length Expandable Function

         (NSC96-2622-E-182-003-CC3, 2007.5.1 to 2008.4.30)      

11.    The Biomechanical Study of A Modified Periacetabular Osteotomy (1)

         (NSC95-2221-E-182-079-MY2, 2006.8.1 to 2007.7.31)    

12.    Development of A Newly Designed Intervertebral Fusion Device

         (ITRI Project, SERPD,  2006.5.1 to 2007.4.30)    

13.    The Development of Artificial Disc Prosthesis with Height-Adjustable Design for Treatment of Discogenic Pain

         (NSC95-2622-E-182A-002-CC3, 2006.5.1 to 2007.4.30)       

14.    Biomechanical Comparison of Different Combinations of Hook and Screw in One Spine Motion Unit- An Experiment in Porcine Model

        NSC94-2213-E-182A-003, 2005.8.1 to 2006.7.31)       

15.   The Development of a Newly Designed Longitudinal Plate Assembly with Length-Adjustable Function for Spinal Fusion

        (NSC93-2622-E-182A-002-CC3, 2004.11.1 to 2005.10.31)        

16.   The Role of Posterior Tension Band Mechanism on Lumbar Spine Instability after Decompressive Procedure for Spinal Stenosis Syndrome-A Biomechanical Study in Porcine Model

        (NSC93-2213-E-182A-002, 2004.8.1 to 2005.7.31)          

17.   The Development of a Newly Designed Stemless Hip Prosthesis with Normal Contact Surface for Total Hip Arthroplasty

        (NSC92-2622-E-182A-003-CC3, 2003.12.1 to 2004.11.30)      

18.   Biomechanical Study in the Optimization of Different Fixation Modes for a Proximal Femoral L-Osteotomy

        (C92-2218-E-182A-001, 2003.8.1 to 2004.7.31) 

19.   The Development of a Newly Designed Angle-Adjustable Dynamic Hip Screw for Intertrochanteric Osteotomy

        (NSC91-2622-E-182A-001-CC3, 2002.12.1 to 2003.11.30) 

20.   The Biomechanical Study of A Modified Intertrochanteric Valgus Osteotomy

        (NSC91-2213- E-182A-002, 2002.8.1 to 2003.7.31) 

21.   The evaluation of fatigue characteristics of spinal implants

        (ITRI Project, PMRP330, 1999.9.1 to 2000.12.31)

  

 

Co-Principal Investigator

 

  1.    The Development of A Newly Designed Facet Spacer for Spinal Fusion Surgery

         (NSC 100- 2622-E-182A-001 -CC3, 2011.11.1 to 2012.10.31)

2.    Biomechanical Study of a Novel Interlocking Acetabular Reinforcement Device for Acetabular Reconstruction (2011.11.1 to 2013.10.31)

3.    Development of Expandable Implant with Structural Support to the Bone Tissue (2) ( NSC 100-2321-B-182-006, 2011.8.1 to 2012.7.31)

4.   Biomechanical Evaluation in Vertebroplasty by Control of Mechanical Properties of PMMA Bone Cement (NSC 100-2314-B-182 -009, 2011.8.1 to 2012.7.31)

5.    Development of Expandable Implant with Structural Support to the Bone Tissue (1) (NSC 99-2321-B-182-006, 2010.8.1 to 2011.7.31)

6.    The impact of metal-on-metal hip arthroplasty on male fertility: Prospective blood, urine and semenanalysis (NSC 99-2314-B-182A-016 -MY3, 2010.8.1 to 2013.7.31)

7.    Experimental Study on Targeted Vancomycine and Methotrexate Delivery into the Allogenic Cortical Bone via A Novel Iontophoresis Device    (CMRPG83036, 2009.9.1 to 2011.8.31)  

8.    Improvement of Biomechanical Performance for Spinal Pedicle Screws with Cement Augmentation in Severe Osteoporosis- A Comparative Study between Cannulated Screw with Cement Injection and Solid Screw with Cement Pre-filling

         (NSC98-2314-B-182-013-MY2, 2009.8.1 to 2011.7.31 )

9.    Development of A Newly Designed Intramedullary Nail for Treatment of Concurrent Ipsilateral Femoral Neck and Shaft Fractures

       (NSC96-2622-E-182A-002-CC3, 2007.11.1 to 2008.10.31) 

10.  A prospective, randomized, controlled clinical trial on the use of systemic antibiotics in two-stage revision hip arthroplasty for infection: Is prolonged course really necessary?

       (NSC96-2314-B-182A-095-MY3, 2007.8.1 to 2010.7.31) 

11   Biomechanical Comparison of Pullout Strength for Cannulated Osteoporotic Spinal Pedicle Screws with Cement Augmentation- A Study Using Tapped and Untapped Pilot Holes

       (NSC96-2314-B-182A-105, 2007.8.1 to 2008.7.31) 

12.         The Development of A Novel Modular Acetabular Reinforcement Device for Roof Reconstruction

       (NSC96-2622-E-182A-001-CC3, 2007.5.1 to 2008.4.30) 

13.         The Development of a Newly Designed Clavicle Curve Wire-Plate Fixator

       (NSC95-2622-E-182A-003-CC3, 2006.11.1 to 2007.10.31) 

14.         Liquid Gentamicin in Temporary Cement Spacers: In Vivo Antibiotic Elution Study

       (NSC95-2314-B-182A- 075, 2006.8.1 to 2007.7.31) 

15.         Newly Designed Trochanteric Hook-Plate (THP) for Treatment of Unstable Intertrochanteric Fractures

       (NSC95-2622-E-182A-001-CC3, 2006.5.1 to 2007.4.30) 

16.     The Development of the Temporary Cement Prosthesis for Two-stage Revision Arthroplasty for Deep Hip Infection

       (NSC94-2622-E-182A- 001-CC3, 2005.5.1 to 2006.4.30) 

17.    The Biomechanical Investigation of the Retrograde Intramedullary Locking Nail Fixation for Distal Femoral Periprosthetic Fracture After Total Knee Arthroplasty    (CMRPG83036, 2004.10.1 to 2005.9.30) 

18.     The Influence of Temperature on the Microstructure and the Mechanical Strength at the Cement-Prosthesis Interface

        (NSC93-2314-B-182A-037, 2004.8.1 to 2005.7.31) 

19.     New Design- Cannulated Screw with Cement Augmentation for Osteoporotic Spinal Pedicle Screw

        (NSC93-E-2622-E-182A-001-CC3, 2004.5.1 to 2005.4.30) 

20.     Injectable calcium sulfate-calcium phosphate bone cement as a bone substitute for posterolateral spinal fusion---a histological and biomechanical study in rabbits

        (NSC92-2314-B-182-046, 2003.8.1 to 2004.7.31) 

21.     The Influence of Surface Roughness and Cementing Technique on the Microstructure and the Mechanical Strength at the Cement-Prosthesis Interface

        (NSC92-2314-B-182A-092, 2003.8.1 to 2004.7.31) 

22.     Plate Treatment for Tibial Plateau Fractures: A Biomechanical Comparison of Tension Band and Buttress Techniques

        (NSC92-2314-B-182A-094, 2003.8.1 to 2004.7.31) 

23.     The Development of a Newly Designed Trochanter Stabilizing Plate (TSP) for Unstable Intertrochanteric Fractures

        (NSC92-2622-E-182A-001-CC3, 2003.6.1 to 2004.5.31) 

24.     The Role of Supraspinous Ligament Integrity on Adjacent Instability after Lumbar Instrumentation and Laminectomy – A Biomechanical Study in Porcine  Model   (NSC91-2314-B-182-067, 2002.8.1 to 2003.7.31) 

25.     The Development of Newly Designed Stemless Hip Prosthesis and Clinical Trial Study (3)

        (NSC 91-2314-B-182A-123, 2002-8.1 to 2003.7.31) 

26.     The Effect of Sagittal Alignment on Instability of the Adjacent Lumbar Segments -A Biomechanical Study of Lumbar Vertebra in Porcine Mode

        (NSC 90-2314-B-182-047, 2001.8.1 to 2002.7.31)

27.     The Development of Newly Designed Stemless Hip Prosthesis and Clinical Trial Study (2)

       (NSC 90-2314-B-182A-161, 2001-8.1 to 2002.7.31) 

28.     The Development of Newly Designed Stemless Hip Prosthesis and Clinical Trial Study (1)

        (NSC 89-2314-B-182-04, 2000.8.1 to 2001.7.31) 

29.     以傳統式及鎖定式骨髓內釘治療股骨幹中段單純性骨折的生物力學比較(2)

       (NSC89-2320-B-182-033, 2000.8.1 to 2001.7.31) 

30.     The Influence of Femoral Physiological Parameters (Geometry and Bone Mineral Density) on the Effect of Bone Loss in THA

        (ITRI Project, PMRPA02, 2000.1.1 to 2000.12.31) 

31.     以傳統式及鎖定式骨髓內釘治療股骨幹中段單純性骨折的生物力學比較(1)

        (NSC89-2320-B-182-033, 1999.8.1 to 2000.7.31) 

32.     The effect of hyperbaric oxygenation in spinal fusion-Using the model of posterolateral intertransverse fusion in rabbits

        (NSC89-2320-B-182-033, 1999.8.1 to 2000.7.31) 

33.     The effect of geometry and cement fixation of femoral stem on the stress shielding effect of proximal femoral in THA (2)

        (NSC89-2320-B-182-052-M08,1999.8.1 to 2000.7.31) 

34.    The effect of geometry and cement fixation of femoral stem on the stress shielding effect of proximal femoral in THA(1)

        (NSC88-2314-B-182-062-M47,1998.8.1 to 1999.7.31) 

35.     Biomechanical analysis for different configuration of AO tension band wiring technique in treating an olecranon fracture

        (NSC87-2314-B-182A-012,1997.8.1 to 1998.7.31) 

36.     The influence of aging effect on the dynamic creep behavior of bone cement at elevated stress level

        (NSC87-2213-E-182-013, 1997.8.1 to 1998.7.31) 

37.     The Clinical Follow-up for the Optimization of Prosthesis-Designing

        (ITRI Project, PMRP241, 1997.6.1 to 1998.5.31) 

38.     The influence of prosthetic cup coverage area on the stability of acetabular fixation in total hip arthroplasty

        (NSC86-2213-E182-005, 1996.8.1 to 1997.7.31) 

39.     Measurement of polyethylene wear in cementless total hip arthroplasty”

        (NSC85-2314-E-182-002, 1995.8.1 to 1996.7.31) 

40.     Development and biomedical properties of bone cement (2)-An in-vivo study

        (NSC85-2331-B-182-060, 1995.8.1 to 1996.7.31) 

41.     Development and biomedical properties of bone cement (1)-Mechanical testing of PMMA impregnated with bone and hydroxyapatite

        (NSC84-2331-B-182-072, 1994.8.1 to 1995.7.31) 

42.     The influence of soft tissue and clinical effectiveness study in ultrasonic assessment for osteoporosis

        (NSC84-2331-B-182A-003-M08, 1994.8.1 to 1995.7.31)